Spectruma GDH 550 HR


  Ask for Machines

<<HOME>> <<Impressum>> <<Machines>> <<Miscellaneous>> <<k26998 Spectruma GDH 550 HR>>
Spectruma GDH 550 HR

Reference: K 26 998

1 second-hand spectrometer/preliminary information

Make:   Spectruma
Model:  GDH 550 HR
Year:   2006

- Software: WinGDOES Version 4.0
- 28 lines installed / s. attachment K26998-Analyse-Spectrometer

Technical Data:
Internal anode diameter 4 mm (optional 1...8)
Max. sample diameter, 120 mm or greater
Min. sample thickness 0,5 mm
Min. sample thickness with special sample holder 5µm
Max. sample thickness, 45 mm
Excitation: in three different operation modes
Cooling: air cooling (6,7,8 mm water cooling)
Votalge regulated, V:
- max. 1530
- intervals regulated 1
Current regulated, mA:
- max. 255
- variable at 0,1 intervals
Power regulated, W
- max. 240
- variable ab 0,1 intervals
Spectrometer setup, 750 mm
Grating, lines/mm 2400, dispersion 0,55 nm/mm
Spectral range, 110...456 nm
Max. channels 63
Vacuum chamber: rotary vane pump
Glow discharge lamp: rotary van pump
Number of vacuum pumps: 2
Voltage 230 V
Frequency 50/60 Hz
Fuses, 16 A passive
Machine dimensions approx. (L x W x H) 1460 x 890 x 1380 mm
Machine weight approx. 630 kg

The machine is designed to be equipped with more than 60 fixed
element channels, using photomultiplier tubes. This Glow Discharge
Optional Emission Spectrometer is perfectly suitable for demanding
applications requiring flexibility, high resolution, and analytical

This machine is designed to analyse coatings up to a depth of 200µm,
with a depth resolution of 1nm to 5 nm on the surface, the GDA 550 HR
is also capable of executing bulk elemental analysis (chemical
composition of materials) providing superior linearity of calibration
curves for complex matrices. The detection limits at most are 01 ppm

This instrument can be used e.g for the following applications:

- to inspect surfaces after diffusion processes
- to examine galvanic coating processes
- to analyse hard material coating via PVD or CVD
- to assess hot dip galvanizing as well as other kinds of galvanizing
- to determine the elemental concentration in layers and bulk material

         - All information given without engagement -

                    - Errors excepted! -

Cold Chamber Pressure
Vert. Cold Chamber Pressure
Hot Chamber Pressure
Metal Dosage Units
Die spray units
Take-out units -robots-
Trimming Presses
Low pressure die casting machines
Try-out presses
Gravity die casting machines
Abrasive Finishing Units
Vertical Boring Mills
Boring Machines /Machining Centres
Milling Machines
Planing   Machines
Grinding Machines / Honing Machines
Gear-cutting Machines
Presses and Forging Machines
Sheet-metal-working Machines
Machines for tubes, bars and profiles
Production Plants
Injection moulding machines for plastic material
Fastener Equipment
Moulding Machines

KRIMACO GmbH, Lindemannstr. 31, D 40237 Düsseldorf, Tel.: +49 211 671001, Fax: +49 211 671005